An April Visit to Tintagel Castle and its Cantilever Bridge

  • blair-gratton-architects-tintagel
  • blair-gratton-architects-tintagel
  • blair-gratton-architects-tintagel
  • blair-gratton-architects-tintagel

The ruin of Tintagel Castle sits in a picturesque location on a peninsula island off the north coast of Cornwall. With the only access from the southern side and sheer cliff faces to all others, the location would have formed one formidable base for rule once upon a time.

The land was inhabited in various stages, initially in the ‘Dark Ages’ from the fifth to seventh centuries, and then in the thirteenth century a substantial Medieval castle was constructed for Richard, Earl of Cornwall. In the fourteenth century when the island had been accessible by a land bridge, this collapsed into the sea. By the seventeenth century the island was only accessible by climbing the cliffs.

Lord Tennyson’s romantic retelling of the King Arthur legend in the latter half of the nineteenth century brought Tintagel back into the public eye. The cave and haven below is said to be where Merlin plucked the infant Arthur from the seas. Steps were carved into the cliff face and the island became a hotspot of tourism – the adjoining town even changed its name to Tintagel. A popular spot for visitors it has remained ever since.

In the twenty-first century, under stewardship of English Heritage and with much greater safety concerns than those of the Victorians, the difficult steps were to be replaced with a contemporary bridge. In 2019, the Architect & Engineer collaboration opened to the public. The bridge is formed of two cantilevers which meet in the middle, one from the mainland and one from the peninsula.

Following the Easter holidays, David from our offices visited the South-West, including a trip to Tintagel and its castle. From the adjacent clifftops, the bridge looks both a magnificent feet and a daunting walk. However, crossing it itself is far more relaxed than first thought – particularly the contribution of the generous width of the walkway.

Well worth a visit for views, history, legend, and appreciation of the Architecture and Engineering feet.

Are you interested in working with an Architect? Read about what it means here.

Our Portfolio of Work

Critical Masonry Works to Protect an Important Grade II* Church

Earlier in the year we worked as Church Architects with a specialist stonemason to carry out masonry repair works in order to protect an important Derbyshire church. Areas of the masonry were at risk: a potential disaster for both the community it serves and the architectural heritage which it embodies.

The PCC asked us to visit the Grade II* Listed Church and a report was swiftly prepared by ourselves for the areas of immediate importance. Ingress of water had led to cracking stonework, rusting ironwork, and instability.

Scaffolding was immediately erected and the works were carried out as quickly and safely as possible. Most notably the bottom half of the buttress pinnacle was cut and replaced like-for-like and fixed in place.

Read about a similar project regarding a truss repair to a church here.

Are you interested in working with an Architect? Read about what it means here.

New Wheelchair Friendly Platform for Derbyshire Church and Hall

  • New Platform to Church Hall - Blair Gratton Architects
  • Hardwood oak post - Blair Gratton Architects
  • Balustrade - Blair Gratton Architects

See our latest update of the accessible platform project we are managing at a Church in Derbyshire. As Church Architect, we have designed a solution to a long-running problem.

The brief was to create a new accessway, linking the Nave of the Church – via the church hall – with the existing toilets at the northern entrance. The church hall has a lower floor level, with 2 sets of stairs to navigate. Currently, if unable to use the stairs, you must exit the church on the southern entrance and navigate round the entirety of the building footprint – not favourable in the worst of British weather.

The new hardwood platform will create a level route, making access through the church hall via wheelchair possible. An existing opening has been raised too, and the works are coming along nicely so far.

Keep a look out for future updates.

Read more about another church we have worked on here.

Are you interested in working with an Architect? Read about what it means here.

New Architect Designed Roof to Tower of Church

  • blair-gratton-architects-New hatch and leadwork
  • blair-gratton-architects-New leadwork and winters view

Last year marked the completion of a project to replace the roof of the church tower at St. Peter’s Church, which we administered as Church Architect.

An early example of structural concrete, thought to be constructed in the early 20th century, the roof replaced the original timber roof. However, after almost a century of use the roof was failing and beginning to crumble into the belfry, becoming an extreme hazard to the occupants and the integrity of the bell chamber below.

As Churches Architect, we were appointed from start to finish to carry out a survey and work with a specialist conservation Engineer to complete a proposal; timber frame with leadwork covering.

A tricky construction process – the only access to the roof was via tight spiral staircase – we worked as Principal Designer and managed the Building Contract with a specialist Contractor to agree a scaffolding solution which worked for all parties. Allowing the church to continue on with its activities and the Contractor to carry out the project in conjunction was important.

We re-visited this winter, to appreciate the quality of the works and admire the fantastic views in the snow fall.

Read more about another church we have worked on here.

Are you interested in working with an Architect? Read about what it means here.